If the system is going to be connected to the Internet, it will
need some means of Domain Name Service (DNS) name resolution to
resolve Internet domain names to IP addresses, and vice versa. This
is best achieved by placing the IP address of the DNS server,
available from the ISP or network administrator, into /etc/resolv.conf. If at least one of your network
interfaces is going to be configured by DHCP then you may not need
to create this file. By default DHCPCD will overwrite this file
when it gets a new lease from the DHCP server. If you wish to
manually configure your network interfaces or manually set your DNS
using DHCP then create the file by running the following:
cat > /etc/resolv.conf << "EOF"
# Begin /etc/resolv.conf
domain [Your Domain Name]
nameserver [IP address of your primary nameserver]
nameserver [IP address of your secondary nameserver]
# End /etc/resolv.conf
EOF
Replace [IP address of the
nameserver] with the IP address of the DNS most
appropriate for the setup. There will often be more than one entry
(requirements demand secondary servers for fallback capability). If
you only need or want one DNS server, remove the second
nameserver line from the
file. The IP address may also be a router on the local network.